Placeholder 

Policies

Placeholder 

Bureau of Waste Management Policies

SW	HW	Policy No.
		BWM 97-01	Solid Waste Permit Fees for Reclamation Facilities (.pdf)
		BWM 97-02	Groundwater Contamination at Small Arid Landfills (.pdf)
		BWM 97-03	Criteria for Determining when a Person is an Operator of a Hazardous Waste TSD Facility (.pdf)
		BWM 98-03	Tonnage Fees for Condemned Properties (.pdf)
		BWM 98-05	Requirements for Solid Waste Facility Permit Actions (.pdf)
		BWM 00-01	Storage and Disposal of Wastes from Methamphetamine Labs (.pdf)
		BWM 00-02	Permit Exception for Remediation of Illegal Drug Manufacturing Sites (.pdf)
		BWM 2000-P3	Enforcement Settlements (.pdf)
		BWM 00-04	Requirement for Landfill Construction Quality Assurance (CQA) (.pdf)
		BWM 01-02	Intermediate Cover at Waste Tire Monofills (.pdf)
		BWM 02-01	Storage of Unapproved Wastes Screened from Construction and Demolition Landfills - January 16, 2002 (.pdf)
		BWM 02-02	Separation from and Monitoring of Groundwater at Solid Waste Landfills (.pdf)
		BWM 02-03	Flexibility for Complying with Litter and Run-on/Runoff Controls and Permit Requirements at MSWLFs - May 1, 2002 (.pdf)
		BWM 02-04	K.A.R. 28-29-113(c) Appendix I Modification (.pdf) REVOKED
		BWM 03-01	Construction at Solid Waste Processing Facilities and Solid Waste Disposal Areas Prior to Permit Issuance/Modification (.pdf)
		BWM 03-02	Leachate Collection Systems at New Small Landfills (.pdf)
		BWM 03-03	Landfill Leachate Analysis Reporting (.pdf)
		BWM 04-01	Disposal Requirements for BSE Tested Cattle Carcasses
		BWM 04-02	Public Participation in Landfill Permitting Process
		BWM 05-01	Notifying Agencies About Proposed New Solid Waste Facilities and Expansions
		BWM 05-02	Electronic Waste Management in Kansas Landfills
		BWM 07-02	Enhanced Waste Screening at C&D Landfills
		BWM 08-01	Waste Tire Management at Salvage Yards
		BWM 08-02	SW Management Planning Committee Member Info Requirements
		BWM 08-03	Listing Amendment for F019 Wastewater Treatment Sludges
		BWM 08-04	Public Review and Comment for Changes to Cover Frequency and Gas Monitoring Frequency at Small Landfills
		BWM 09-01	Limit on Term of Variances Incorporated in Municipal Solid Waste Permits
		BWM 09-02	Interpretation of "Premises" in Waste Tire Laws
		BWM 2010-P1	Compliance Assistance Visits
		BWM 10-02	Construction and Demolition Waste: Volume to Weight Conversion Factor
		BWM 2010-P3	Permitting Requirements for Dead Animal Burial Sites
		BWM 2011-P1	Processed Waste Tires: Applicability of the Tonnage Fee
		BWM 2011-P2	Cutting Sidewalls out of Tires for Landfill Disposal
		BWM 2011-P3	Solid Waste Processing vs Recycling
		BWM 2011-P4	Solid and Hazardous Waste Enforcement
		BWM 2011-P5	HHWs That Accept CESQG and KSQG Waste - revised
		BWM 2011-P6	Variances to the local Government Financial Test
		BWM 2011-P7	Regulatory Status of Pharmaceuticals Collected by Take-Back Program
		BWM 2012-P1	Access and Boundary Controls at Solid Waste Landfills
		BWM 2012-P2	Regulation of Pharmaceuticals from Non-Exempt Generators of Hazardous Waste
		BWM 2012-P3	Use of Day Accumulation Containers

Division of Environment Policies

SW	HW
		The Implementation of NESHAP/RCRA Emission Standards for Hazardous Waste Combustors (.pdf)
		Open Burning at KDHE Approved Tree and Brush Sites (.pdf)
		Permit Renewal Fees For Generator Owned/Operated Industrial Waste Landfills (.pdf)

EPA Technical Guidance Documents

• Quality Assurance and Quality Control for Waste Containment Facilities (EPA/600/R-93/182)(Sept 1993) - (18.5 MB)

Individual Chapters

• Chapter 1 - MQA and CQA Concepts and Overviews
• Chapter 2 - Compacted Soil Liners (part 1)
• Chapter 2 - Compacted Soil Liners (part 2)
• Chapter 3 - Geomembranes (part 1)
• Chapter 3 - Geomembranes (part 2)
• Chapter 4 - Geosynthetic Clay Liners
• Chapter 5 - Soil Drainage Systems
• Chapter 6 - Geosynthetic Drainage Systems
• Chapter 7 - Vertical Cutoff Walls
• Chapter 8 - Ancillary Materials, Appurtenances, and Other Details