Underground Injection
Control (UIC) Program

Class I

Class I: Wells used to inject hazardous wastes or dispose of industrial and municipal fluids beneath the lowermost formation containing, within one quarter (1/4) mile of the well bore, a source of fresh or usable water.

Electronic Monitoring Requirements

• KDHE UIC Class I Disposal Well Electronic Monitoring Specifications (.pdf) (4/11)

Forms

• Class I Non-Hazardous Waste Injection Well Repermit Application for Subsurface Disposal of Non-Hazardous Industrial Liquid Waste (.pdf) (4/11)
   
• Class I Non-Hazardous Waste Injection Well Application for Subsurface Disposal of Non-Hazardous Liquid Industrial Waste (.pdf) (4/11)
   
• Class I Hazardous Waste Injection Well Repermit Application for Subsurface Disposal of Hazardous Industrial Liquid Waste (.pdf) (4/11)

• Class I Underground Injection Control (UIC) Hazardous Waste Injection Well Application for Subsurface Disposal of Hazardous Liquid Industrial Waste (.pdf) (4/11) (NEW)
   
• Inspection Report for CL1 Injection Well (.pdf) (4/11)
   
• Well Plugging Report (.pdf) (4/11)
   

• Notice of Ownership/Operator Change (NOC) (.pdf) (4/11)

• Class I Disposal Well Formation Pressure Fall-Off Test Plan (.pdf) (4/11) (NEW)
   

Procedures

• UICI-1  Procedure for Developing a Chemical Treatment Plan (Including Acidizing) for a Class I Disposal Well.pdf (4/11)
   
• UICI-2  Formation pressure fall-off test and testing plan development procedures.pdf (4/11)
   
• UICI-3  Procedure for conducting the oxygen activation (OA) log for evaluation external mechanical integrity of a class I disposal well.pdf (4/11)
   
• UICI-4  Procedure for Transfer of a Class 1 Non-Hazardous Waste Disposal Well Permit to a New Permittee - No Other Changes in Permit.pdf (4/11)
   
• UICI-5  Procedure for Signatories to Permit Application and Monitoring Reports for Class I Disposal Well.pdf (4/11)
   
• UICI-6  Procedure for the pressure mechanical integrity test for evaluating internal mechanical integrity of a class I disposal well.pdf        (4/11)
   
• UICI-7  Procedure for Special Authorization to Inject a Waste not Listed in the Class 1 UIC Permit.pdf(4/11)
   
• UICI-8  Procedure for Demonstrating Financial Assurance for a Class I Industrial Waste Disposal Well.pdf (4/11
   
• UICI-9  Procedure for conducting the temperature log for evaluating external mechanical integrity of a class I waste disposal well.pdf (4/11)
   
• UICI-10 Procedure for Conducting a Compatibility Evaluation for a Class I Disposal Well.pdf (4/11)
   
• UICI-11 Procedure for the Plugging and Abandonment of a Class 1 Non-Hazardous Waste Disposal Well-Longstring Cemented from Bottom to Surface.pdf (4/11)
   
• UICI-12 Procedure for the Plugging and Abandonment of a Class 1 Non-Hazardous Waste Disposal Well Completed with Longstring Cemented at Lower Part of Well Only - Uncemented Portion of Longstring to be Removed.pdf (4/11)
   
• UICI-13 Procedure for the Plugging and Abandonment of a Class 1 Non-Hazardous Waste Disposal Well completed with Longstring Cemented at Lower Part of Well Only - Longstring to Remain in the Well.pdf (4/11
   
• UICI-14 Procedure for Completing Section #10 of the Permit Application for a Class I Non-Hazardous Waste Injection Well.pdf (4/11)
   
• UICI-15 Procedure for Submitting a Request to Increase the Injection Volume for a Class I Underground Injection Control (UIC) Industrial Waste Injection Well Permit.pdf (4/11)
   
• UICI-17 Procedure for Submitting a Proposal to Add a New or Different Waste to a Class I UIC Industrial Waste Injection Well Permit.pdf (4/11)
   

• UICI-18 Procedure for Authorization to Inject Treatment Chemicals not Listed in the Class I UIC Permit .pdf (4/11)

• UICI-19 Procedure for Developing a Class I Disposal Well Workover Plan.pdf (4/11)

Policies

• Prohibition of Injection of Industrial Waste into the Cedar Hills Formation, KDHE Policy #90-3, November 7, 1990.
   
• Determination of the Types of Wastes Eligible for Disposal Into Class I Underground Injection Control (UIC) Disposal Wells, KDHE Policy #91-1, February, 1991.